Industrial Nylon Cable Ties in a single series can step from 120 LBS to 175 LBS to 250 LBS, and each step suits a different job. In metric terms the three ratings are roughly 54 kg, 79 kg and 113 kg of tensile strength. That spread is wide enough that the tie holding a cable run on a construction site and the tie fixing a harness on a machine are rarely the same part.
The figure on the pack is a tensile rating in pounds: the load a tie is rated to hold in testing before it fails.
|
Rating |
Approximate metric equivalent |
|
120 LBS |
54 kg |
|
175 LBS |
79 kg |
|
250 LBS |
113 kg |
A rating describes the tie, not the bundle. Within Industrial Nylon Cable Ties, a heavy but thin cable run can sit comfortably on a lower rating, while a thick bundle needs a tie with enough length and body to go around it at all. For that reason Industrial Cable Ties are specified by length and width as well as by rating, and the parameters for each size are confirmed before an order is placed.
NBSZS lists seven fields of use for its Industrial Nylon Cable Ties, and the bundles in each field are different in kind:
|
Field |
What gets bundled |
What drives the choice |
|
Power distribution |
Thick cables |
Bundle diameter and the weight of the run |
|
Industrial machinery |
Wire harnesses and large components |
How firmly the harness has to stay in place |
|
Construction sites |
Cables and pipes |
The size of the run being fixed |
|
Solar panel installations |
Cables along frames and mounts |
Exposure to weather |
|
Automotive wiring |
Wire harnesses |
The temperature range where the harness runs |
|
Telecommunications infrastructure |
Cable runs |
Exposure to weather and long-term stability |
|
Heavy equipment assembly |
Large components and thick cables |
Load-bearing capacity |
All three ratings share the same Nylon 66 material, which carries UL 94V-2 certification, and the same working range of -35℃ to 85℃. The choice between them is therefore about load and bundle size, not about material. Several of the fields above sit outdoors, and UV-resistant versions of Industrial Nylon Cable Ties can be customised and confirmed with the factory for those projects.

The minimum order is 1,000 packs per size, so every rating and size combination is its own line on an order. A distributor that wants all three ratings of Industrial Nylon Cable Ties in one range starts with at least three of those lines, and the quantities can be set to match how quickly each rating sells.
Heavy Duty Nylon Cable Ties can also be ordered as OEM Industrial Nylon Cable Ties, with custom colours, sizes, private labelling and packaging. Samples are available for evaluation, which lets a buyer test a rating against its own bundles before committing to a full pack quantity.
A thicker, stronger body is harder to pull tight by hand, and the difference shows many on large bundles where the tail has to be drawn hard to seat the tie. Tensioning tools solve this by applying a measured pull, and many of them trim the tail flush once the tie is tight. NBSZS lists Nylon Tie Tools as their own category beside the ties, so a bundle can be fixed and finished with equipment from the same supplier.
The tool and the tie still have to suit each other: the width of the tie decides which tool head it fits, which is why the tie size and the tool are checked together when Industrial Nylon Cable Ties are ordered for a project that will be installed in volume.